#1  
Old 09-04-2009, 12:39 PM
caker_chris's Avatar
caker_chris caker_chris is offline
Junior Member
 
Join Date: Aug 2009
Posts: 12
Default Mods For Accuracy

What kind of mods do you guys and gals recommend for bttr accuracy?

By the way I have an ics m4 sir if that helps any.
Reply With Quote
  #2  
Old 09-04-2009, 02:45 PM
TheReaper's Avatar
TheReaper TheReaper is offline
Administrator
 
Join Date: Feb 2009
Location: California
Posts: 75
Default

I like changing out my hopup nub for a big out H-hop - its a quick, cheap, easy thing to do.
Reply With Quote
  #3  
Old 09-07-2009, 09:11 AM
caker_chris's Avatar
caker_chris caker_chris is offline
Junior Member
 
Join Date: Aug 2009
Posts: 12
Default

i will look in to that, what about a tightbore inner barrel? any recommended brands and bore size?
Reply With Quote
  #4  
Old 09-07-2009, 09:20 AM
TheReaper's Avatar
TheReaper TheReaper is offline
Administrator
 
Join Date: Feb 2009
Location: California
Posts: 75
Default

I'd go with a 6.03 tightbore. 6.01 would probably give you a nice FPS boost, however you need to make sure you use high quality bbs, as you'll be more susceptible to jams. I'd recommend edgi or prometheus.
__________________

Reply With Quote
  #5  
Old 09-08-2009, 03:11 AM
caker_chris's Avatar
caker_chris caker_chris is offline
Junior Member
 
Join Date: Aug 2009
Posts: 12
Default

what is the standard bore size on your average gun and will the barrel make that much of a difference in accuracy?

as well, how much of an fps boost would i get about with a 6.03 and a 6.01? i could use alittle more muzzle velocity especually for the outdoor games.
Reply With Quote
  #6  
Old 09-08-2009, 08:24 AM
TheReaper's Avatar
TheReaper TheReaper is offline
Administrator
 
Join Date: Feb 2009
Location: California
Posts: 75
Default

The standard, atleast for Tokyo Marui is 6.08. I'm unsure of the FPS gain between 6.03 and 6.01, as I've only used a 6.01 in my spring sniper rifle. Maybe someone else can chime in on this?
__________________

Reply With Quote
  #7  
Old 09-08-2009, 08:28 AM
caker_chris's Avatar
caker_chris caker_chris is offline
Junior Member
 
Join Date: Aug 2009
Posts: 12
Default

alright thanks for the info, i have one final question though, how do i know how long of an inner barrel i need for my ics m4 sir?
Reply With Quote
  #8  
Old 09-08-2009, 11:21 AM
TheReaper's Avatar
TheReaper TheReaper is offline
Administrator
 
Join Date: Feb 2009
Location: California
Posts: 75
Default

I don't know about ICS, but some manufacturers list the inner barrel length in the manual that comes with the AEG. You could always just take out your stock barrel, and measure it.
__________________

Reply With Quote
  #9  
Old 09-08-2009, 11:50 AM
caker_chris's Avatar
caker_chris caker_chris is offline
Junior Member
 
Join Date: Aug 2009
Posts: 12
Default

yeah the manual that came with the gun says very little, in fact its just the generic m4 manual that applies to all of the m4's. says how to adjust the sights and the hop up and basic stuff like that. No specs at all. Looks like i will have to measure it my self. Thanks for all the info, its been a big help.
Reply With Quote
  #10  
Old 09-10-2009, 01:15 AM
mamba's Avatar
mamba mamba is offline
Junior Member
 
Join Date: Mar 2009
Posts: 13
Default

Our Trusted accuracy set up 350-450FPS
1. Precision barrel 300mm and above(we prefer prome)
2. Prome, systema, G&P hop up unit ( there's no difference between the 3 if you set it right)
3. Prome hop rubber (soft and hard depends on FPS)
4. Shredders Concave Spacers
5. And of course your airsealing technique.
__________________


Last edited by mamba; 09-11-2009 at 10:27 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 12:33 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.